Finding Lake Forest roof contractors for new construction

When you start looking for Lake Forest roof contractors you need to pay attention to whether they are experienced with new construction, along with existing construction. The two require very different approaches to the work. If you are looking for someone to provide the roofing work on your new construction you want to make sure that is what the contractor specializes in.

What is the difference between new and existing roofing?
The main difference breaks down to how the contractor is expecting to work, and with what types of materials. With many of the new construction projects you can have a roofing contractor in and out faster than with existing construction work. The crews are used to a higher pace of work as there is less care that has to be taken for existing siding and finishes on the home. The contractor who specializes in new construction is also going to be more attuned to the preparation of the roof structure in regards to insulation, support and drainage. It isn’t that they know more about it than a contractor who only does roof repairs or replacements, but the stage of the home construction they see has given them more exposure to it.

Speed is the real difference
Lake Forest roof contractors who specialize in new roofs are going to be more accustomed to working with other contractor schedules as well. A repair and replacement contractor won’t often have to fit their work in around the plumber or landscaper. This doesn’t mean that you can’t use a repair and replacement contractor for a new roof, it is just that you must be careful with the schedule planning to make sure that if there are delays they won’t result in charges from other contractors.

Are there Lake Forest roof contractors who do both?
Yes, there are contractors who do both new and replacement roofs, as well as repairs. This is the ideal contractor to hire for any of your roofing work. What becomes difficult is that many roofing companies will say that they “do it all” just to get the work. Your best bet is to ask to see a list of the work that has been done by the Lake Forest roof contractors you are considering, and to call former client’s to check their references. Roofing is a skill; it isn’t something you can pick up easily no matter what the DIY channels tell you. Having experience means knowing what the potential is in each project environement. What can happen on a new construction site is far different from an established site. You want to pick the contractor that can anticipate what can happen, which is possible when you get one that has a history of working on all types of jobs.

And then there are the usual tasks
Before you make a decision as to which of the Lake Forest roof contractors you want to hire you have to do your homework. This means you need to think through the timing of the planned work (try to avoid the stormy season), plan around any of your other contractors, and make sure that the work can be done in a timely fashion before the next contractor in the phases comes through. Next, you want to make sure that the contractors you are considering have all the proper licensing, insurance and other requirements to operate in Lake Forest. Talk to several of the Lake Forrest Roof Contractors who can meet your scheduling needs then, check references and look at prior work. You want to wait to do that step until you know they are available.

One last tip about picking Lake Forest roof contractors
One last tip  - say you have done your homework and talked to a few contractors so all you have to do is check the references out and see the work that has been done. Before you do this, ask the contractor how long they will hold the schedule spot open for you. Respect their time frames and act accordingly. You don’t want the disappointment of checking the references, finding the contractor you love only to discover that they gave your slot away because it was taking too long.

For more info about Chicago roofing companies and fiber cement siding installation  visit us.
Source: Click Here

Read more »

Metal Roof Installation

While metal roofing can be slick, reflective, and fussy to install, the majority of metal roof projects aren’t as difficult as they may seem. Of course, metal roofing can be applied to any roof, but let’s focus on a very simple residential hipped roof.

•    All sides slope toward the ground. Two sides are triangular, while the other two sides are trapezoidal.

•    The standard residential home with metal roofing will generally have identical pitch or slope on all sides.


Must I Remove The Existing Roof?

•    Metal roofing can be installed over existing roofing, assuming the structure of the roof can sustain the weight. It adds a significant amount of weight and requires shoring of roof supports.

•    The most effective means to install a metal roof is to remove the old roof, structure new support, and begin again.

Begin at the Top

A practical tool now comes into play—the tape measure. Before you can order materials, you must know the length of needed coverage between eave and ridgepole, the piece of wood that runs from front to back and supports the rafters.

•    Picture the roof as a cross section in the shape of a triangle, longest side down. This is called a “truss,” and is also the “run distance.”

•    Now measure the leg of the triangle which runs from each end of the run distance to the ridgepole. This is the “rise distance.” In our case, the rise distance is the same on both sides.

•    From here,you can determine the square footage of your roof, and determine how much roofing material to order.

Adding to the Framework

Next comes the insulation layer. All roofs have moisture, therefore you want to block it from entering the sheathing.

The installation process begins at the edge. First, install edging around the entire roof overhang. This is done by nailing to the roof framework, and overhanging the edge of the gutter system.

Next, position the metal panels horizontally, square to the edge, and overhanging slightly. Once in place, secure the panels to the structure with washer-head screws (to keep out water) set a foot apart. It would be a good practice to snap a chalk line at each level to position the screws on the frame and create an attractive picture from the ground.

The Layout Process

Subsequent rows must overlap by at least an inch. In a particularly moist environment, silicone may be applied at the place of overlap; the pressure on the metal sheet will spread the silicone and create a seal.

Finally comes the flashing that covers the vertical joints. Where there is a ridge, that flashing can be bent to fit. Like the plates themselves, flashing pieces must overlap towards the bottom, for water flow.

On simple buildings where there is little concern for perfection, a DIY project is possible. For elaborate jobs with many joints, dormers, and varying roof styles, it is best to hire a metal roof installation.

Source: Click Here

Read more »